| GENERAL DESCRIPTION |
It is based on special resin modified with phenolic medium and zinc chromate as corrosion inhibiting pigment. |
| RECOMMENDED USE |
The primer is suitable for steel and light alloys in mild to moderately corrsive atmospheres. |
| PRODUCT SPECIFICATION |
| Colour |
Red oxide |
| Finish |
Matt - Egg shell |
| Flash Point |
Above 30 º C |
| Solids by Volume |
36% |
| Recommended Dry Film Thickness |
25 Microns |
| Theoretical Spreading Rate |
14.4 sq.m/ltr |
| Drying Time- Touch Dry |
1 - 2 Hrs |
| Hard Dry |
8 - 10 Hrs. |
| Recoating Interval (Min.) |
16 Hrs |
| Recoating Interval (Max.) |
None |
| Method of Application |
Brush / Airspray/ Roller |
| Thinner Recommended |
Adstar G.P. Thinner 100 |
| Shelf Life |
12 Months |
|
| SURFACE PREPARATION |
Remove oil, grease, dust, loose paint and any other foreign matters by using wire brushes either mechanical or manual emery papers, hammers etc. |
| SUBSEQUENT COATING SYSTEM |
As per recommended painting system |
| REMARKS |
APPLICATION DATA :
1. Use only where temp is above 10 º C and apply only on dry and clean surface.
2. Stir well before and during painting.
|
| SAFETY PRECAUTIONS |
• Keep the material away from heat, spark, and direct flame.
• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.
|
| NOTE |
• Thinner consumption and loss factor in practical coverage of paint depend upon the site condition.
• Avoid inhalation of solvent vapor or paint mist by using facial mask. Use hand gloves and goggles to protect against direct contact of liquid paint with skin and eyes.
|
