It is a two pack polyamide cured epoxy coatins based on laminar micaceous iron oxide pigment. Designed for application on structural steel as an intermediate or finish coat exposed to aggressive coastal and industrial environment. The product acts as a tough barrier coat with excellent impermeability to moisture., The grey version contains titanium dioxide pigment apart from MIO pigment.

Excellent protection to steel structure, tanks, pipe lines etc.

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable detergent solution and allow it to dry.

Epoxy & Poly urethane coatings.

• Apply only on dry and clean surface above 10º C (above dew point).
• May be recommended in other film thickness than indicated depending upon the purpose and area of use.
• Induction period of 30 min is recommended.

• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.

FEBRUARY 2011