| GENERAL DESCRIPTION |
It is based on Phenolated alkyd medium and Zinc phosphate pigment having superior protection properties than conventional primers such as Red oxide & Zinc Chromate Primer in aggressive coastal and humid environment |
| RECOMMENDED USE |
Protection of steel surface where protection is required more than usual system. |
| PRODUCT SPECIFICATION |
| Colour |
Grey & Red |
| Finish |
Matt - Egg shell |
| Flash Point |
Above 30º C |
| Solids by Volume |
42% |
| Recommended Dry Film Thickness |
35 - 50 Microns |
| Theoretical Spreading Rate |
12 - 8.4 sq.m/ltr/coat |
| Drying Time- Touch Dry |
Within 3 Hrs |
| Hard Dry |
Within 10 Hrs |
| Recoating Interval (Min.) |
12 Hrs |
| Recoating Interval (Max.) |
None |
| Method of Application |
Brush /Roller/Airspray/Airless Spray
|
| Thinner Recommended |
AdstarG.P. Thinner 100 |
| Shelf Life |
Upto 12 months |
|
| SURFACE PREPARATION |
Surface must be free from any foreign particles. Remove oil, grease, dust, loose paint and any other foreign matters. Clean by wire brushes either mechanical or manual, emery papers, hammer etc. |
| SUBSEQUENT COAT |
Adstar HB Bitu Black. |
| REMARKS |
APPLICATION DATA :
1. Use only where temp is above 10º C and apply only on dry and clean surface.
2. Stir well before and during painting.
|
| SAFETY PRECAUTIONS |
1. Keep the material away from heat, spark, and direct flame.
2. In case of contamination, rinse with fresh running water and seek medical help at once.
3. Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
4. Follow local and national Safety rules.
|
| NOTE |
1. Thinner consumption and loss factor in practical coverage of paint depend upon the site condition.
2. Avoid inhalation of solvent vapor or paint mist by using facial mask. Use hand gloves and goggles to protect against direct contact of liquid paint with skin and eyes.
|