It is a wo component high build epoxy polyamide paint. It forms a hard and tough coating resistant to abrasion and impact and to fresh/sea water, diesel, oil, splashes of petrol, lubricating oil etc.

As a finishing or intermediate coat for protection of storage tank exterior in severely corrosive atmosphere and marine atmosphere.

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable detergent solution and allow it to dry.

• Apply only on dry and clean surface above 10º C (above dew point).
• May be recommended in other film thickness than indicated depending upon the purpose and area of use.
• Induction period of 30 min is recommended.

1. In case of contamination, rinse with fresh running water and seek medical help at once.
2. Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
3. Follow local and national Safety rules.

FEBRUARY 2011