It is amine adduct cured high build high performance two pack coal tar epoxy coating giving very good toughness and water resistance. It stands corrosive conditions in soil immersion and also certain acidic and alkaline environments. A polyamide cured version is also available.

• Recommended for application on underwater hull, even in conjunction with cathodic protection.
• Also can be used in the cargo holds blast tanks & tanks carrying crude oils.
• Can be used on submerged and non- submerged areas of marine structures.

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable solution and allow it to dry.

As per recommended coating system.

• Apply only on dry and clean surface above 10º C (above dew point).
• May be recommended in other film thickness than indicated depending upon the purpose and area of use.
• Induction period of 30 min is recommended.

• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.

FEBRUARY 2011