| GENERAL DESCRIPTION |
This is a two component solventless high build coal tar epoxy paint having very good toughness and water resistance after full curing of 7 day at 30°C. |
| RECOMMENDED USE |
4. Recommended for application on underwater hull, even in conjunction with cathodic protection.
5. Also can be used in the cargo holds blast & tanks carrying crude oils.
6. Can be used on submerged and non-submerged areas of marine structures.
|
| PRODUCT SPECIFICATION |
| Colour |
Black |
| Finish |
Egg Shell |
| Mixing Ratio by Vol. |
Base: Accelerator- 4 :1(by volume)
[Wait for 45 to 60 min before application]
|
| Flash Point |
Above 30º C |
| Volume Solids |
97% (Min) [system contains approx.10% creosote oil which will |
| (application surface temparature-38°C) |
be volatilized at higher temperature] |
| Dry Film Thickness,per coat |
250-300 Microns |
| Theoretical Spreading Rate |
3.88 sq.m/ltr (250 mic,Dft) , 3.23sq.m/ltr (300 mic,Dft) |
| Drying Time- Surface Dry |
Within 7 Hrs |
| Handleable Dry |
Within 24 Hrs. |
| Full cure |
7 days |
| Viscosity |
Highly viscous |
| Interval before over coating |
Minimum-24 Hrs, Maxmimum-7 days |
| Wt.per Lit |
1.1 to 1.2 |
| Storage Life |
Upto 12 months so long as the material is stored in sealed contains under standard storage condition(30°C) |
|
| LIMITATION |
The finish tends to chalk when exposed to sunlight although protective properties of the film remain practically unaffected. |
| SYSTEM SELECTION |
Istcoat:Apigard Zinc Rich Primer (95%).Zinc in dried film,Dft – 30 mic(Max)
2ndcoat:250 mic.Apigard Coal tar Epoxy(Solvent less)
3rd Coat: 250 mic.Apigard Coal Tar Epoxy(Solvent less)
|
| CHEMICAL RESISTANCE : |
| Exposure |
Splash & Spillage |
Fumes & outdoor exposure |
Acids
Alkalis
Solvents
Salt
Water |
Good
Good
Poor
Excellent
Excellent |
Good
Good
Poor
Excellent
Excellent |
|
| APPLICATION DETAILS: |
•Method of Application: Brush/Roller/Airless spray
•Notes on Airless Spray : Top Range - 21 to 26 thou
•Total output fluid pressure : 2700 to 3500 Psi (190 to 246 kg/Microns.)
|
| SAFETY PRECAUTIONS: |
• Use PVC or polychloroprene gloves and face shield are desirable, as the paint contains Creosote Oil which contains phenols.
• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.
|
