It is a high build chlorinated rubber based finish coat paints specially resistance to Salt water and many chemicals. It gives glossy film with high resistance to moisture penetration fungus growth fumes and spillage of most acids and chemicals .the coating is ideal for application of swimming pools.

Recommended to use in moderately to severely corrosive marine as well as industrial environment as a intermediate or finishing coat in chlorinated rubber systems. It is also suitable for steel structure in refineries, fertilizers factories, sewage plant, docks etc.

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable detergent solution and allow it to dry.

As per recommended coating system

APPLICATION DATA :
1. Use only where temp is above 10º C and apply only on dry and clean surface.
2. Stir well before and during painting.

1. Keep the material away from heat, spark, and direct flame.
2. In case of contamination, rinse with fresh running water and seek medical help at once.
3. Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
4. Follow local and national Safety rules.

1. Thinner consumption and loss factor in practical coverage of paint depend upon the site condition.
2. Avoid inhalation of solvent vapor or paint mist by using facial mask. Use hand gloves and goggles to protect against direct contact of liquid paint with skin and eyes.