Contact With Us
  +91 983 005 8333
  apex.chemicals2010@gmail.com

Query

Product File

ROAD MARKING PAINT – WHITE & OTHER COLOURS

ROAD MARKING PAINT – WHITE & OTHER COLOURS
GENERAL DESCRIPTION

Based on synthetic resin, on toxic,non-inflammable. does not bleed at all onasphalt roads and also adheres very well on concrete surface. Although it takes coupleof days to develop full water resistance. Itgives very good durability on the roads .

RECOMMENDED USE

Recommended to use on asphalt / cemented road.

PRODUCT SPECIFICATION
Colour White, Golden Yellow, As per Selected Range.
Finish Mate - Eggshell.
Flash Point Above 20oC
Solids by Volume 43% approximately.
Recommended Dry Film Thickness
Theoretical Spreading Rate 12-14sq.m/ltr
Drying Time- Touch Dry ¼ - ½ Hr.
Hard Dry 6-8 Hrs.
Recoating Interval (Min.) 8 Hrs .
Recoating Interval (Max.) None
Method of Application Roller / Brush Airless spray
Shelf Life Up to`12 months
Thinner Recommended Suitable Thinner
SURFACE PREPARATION

The road surface should be cleaned from dirt,soil, oily matter or similar contaminants bywashing with fresh water and suitable detergents. the paint is to be applied when the surface is fully dry.

SUBSEQUENT COAT

As per recommended paint system.

REMARKS

1. Use only where temp is above 10oC and apply only on dry and clean surface.
2. Stir well before and during painting.

SAFETY PRECAUTIONS

• Keep the material away from heat, spark, and direct flame.
• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.

NOTE

• Thinner consumption and loss factor in practical coverage of paint depend upon the site condition.
• Avoid inhalation of solvent vapor or paint mist by using facial mask. Use hand gloves and goggles to protect against direct contact of liquid paint with skin and eyes.

ISSUED ON

FEBRUARY 2011

Recommended Products