It is high build coating based on phenolated alkyd resin vehicle and lamellar micaceous iron oxide pigment. It has a good moisture resistant. It is designed for use as tie coat between primer & finish paint to achieve higher DFT

Recommended for steel works of bridges,cranes,jetty structures,storage tanks, towers,pipings, machinery & mining equipments

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable detergent solution and allow it to dry.

As per recommended painting system

APPLICATION DATA :
1. Use only where temp is above 10 º C and apply only on dry and clean surface.
2. Stir well before and during painting.

Keep the material away from heat, spark, and direct flame.
In case of contamination, rinse with fresh running water and seek medical help at once.
Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
Follow local and national Safety rules.

Thinner consumption and loss factor in practical coverage of paint depend upon the site condition.
Avoid inhalation of solvent vapor or paint mist by using facial mask. Use hand gloves and goggles to protect against direct contact of liquid paint with skin and eyes.