It is a two component high build epoxy polyamine coating specialy designed for takn lining for storage of ATF and other petroleum products, vesitable oils, fresh / saline water.

As a finishing coates for protection of storage tank interior in severely corrosive atmosphere and marine atmosphere.

Blast clean to Sa 2½ grade. OR full use of mechanical tools along with manual cleaning and wire brushing to remove oil and grease with suitable detergent solution and allow it to dry.

• Apply only on dry and clean surface above 10º C (above dew point).
• May be recommended in other film thickness than indicated depending upon the purpose and area of use.
• Induction period of 30 min is recommended.

• In case of contamination, rinse with fresh running water and seek medical help at once.
• Provide sufficient ventilation when working with solvent based coatings in confined spaces and stagnant air.
• Follow local and national Safety rules.

FEBRUARY 2011